IntroductionHere comes the new member of G-Priv family. G-Priv Baby, a small and delicate stunner, whose highly sensitive 2.0inch touch screen provides you outstanding man-machine interaction experiences. It is compact and ergonomically designed with stylish and elegant high-gloss finish. Equipped with a top battery slot, battery replacement becomes more convenient. G-Priv Baby can offer up to 85 watts of power and can be matched with TFV12 Baby Prince Tank, bringing you dense cloud and pure flavor. Give it a shot and you’ll find how exquisite it is, not only for its stunning exterior, but the performance as well! Innovation keeps changing he vaping experience!
The Kit Includes:
1 x G-Priv Baby Mod
1 x TFV12 Baby Prince Tank
1 x V8 Baby – Q4 0.4ohm Quadruple coils (Pre-installed)\
1 x V8 Baby – Q2 0.4ohm Dual coils
1 x Replacement Glass Tube
1 x User Manual
1 x USB Cable
G-Priv Baby ModSize: 72*51*29.2mm
Power Range: 1W-85W
Standby Current: <250uA
Output Voltage: 0.5V-9.0V
Resistance Range: 0.1ohm-2.5ohm (VW)/0.05ohm-2.0ohm (TC)
Temperature Range: 200℉-600℉/100℃-315℃
TFV12 Baby Prince
Verification1. Using your Smartphone or PC to visit SMOK official website:
2. Scratch off the coating of the security label on the package to reveal the 16 authentication code. Enter it into the input field on the webpage to verify. The result will be displayed after a few seconds.
3. If you have any question, please contact SMOK consultant via e-mail, phone or our website to get more help.
WarrantyNote: Please carefully keep the anti-counterfeiting codes on the package. Only the activated products can get after-sale service.
G-Priv Baby Warranty Period: 6 months from the Purchase Date.
Within the 6 months, some items may not be eligible for service due to misuse, damage, or other failures causes other than by manufacturer defects or premature failure. Please contact SMOK Authorized Vendor for more information and terms of service.
The ”G-Priv Baby Kit Customers Card” is an important proof for customers to get warranty service, please keep it. Read the card carefully and fill it out correctly. Warranty requests must be accompanied by this card.
For more warranty policies and processes, please visit our official website:
Preparation before use:1) Please make sure the battery you’re using corresponds with the BATTERY WARNING CARD
2) Before vaping, please make sure the tank is filled with enough e-juice
1) Screw off the battery cover counterclockwise;
2) Put the battery into the battery slot with correct direction;
3) Close the battery cover
Prompts about battery1) BATTERY TOO HIGH: The Battery voltage is higher than 4.5V. Replace another one.
2) BATTERY TOO LOW: The Battery voltage is lower than 3.3V. (The mod would automatically be shut down when it has warned for several times or either of the battery voltage is lower than 3.1V)
3) PCBA TOO HOT: The internal temperature is too high and the mod would automatically be shut down; you can vape again when the temperature decreased.
Attach AtomizerG-Priv Baby uses a spring loaded 510 connector. Please be certain that there is nothing between the mod and attached atomizer.
1) Connect the atomizer to the device and tighten it clockwise
2) After the device is powered on, please press the Fire Key to vape.
Prompts about atomizer
1. NEW COIL: A new coil will be detected in the TC Mode. Choose “Y” you’re using a new atomizer and choose “N” to confirm it’s the same one.
2. OHM TOO LOW: The resistance is lower than minimal value (In the TC Mode, the minimal value is 0.05ohm; in the VW Mode, the minimal value is 0.1ohm)
3. OHM TOO HIGH: The resistance is higher than 2.0ohm and lower than 10ohm. Please replace another atomizer.
4. ATOMIZER SHORT: The atomizer is short circuited. Please power off and change attach atomizer.
5. NO ATOMIZER: The resistance is higher than 10ohm or there’s no atomizer. Please attach another atomizer.
1. Power On:While the device is off, fast press and hold the Fire Key 5 times in 2s to power on with “SMOK”;
2. Power Off:Fast press and hold Fire Key for 5 times in 2s with “Power off？ YES/NO“ and choose YES to power off.
3. Vaping:While the device is on, hold Fire Key to vape (it will be forced to stop working when one vaping is longer than 10s, release and press again to vape again);
Quickly press the Fire Key 5 times to lock or unlock
4. Quick Actions：1） Press Fire Key 3times, the screen and the fire key locked, you cannot fire the device. With another 3 press you can unlock the screen and vape again.
2） Press and hold the Screen Locked Button for one or two seconds the screen can be locked or unlocked, and you can still vape at the state of screen locked.
3） Long press fire key for 5 seconds at the state of locking you can slightly adjust electric resistance.
5. User Guide:After power on you can enter into main interface, and you can easily adjust values on the touch screen of G-Priv Baby:
1) VW Mode
Drawing effectGently press the “VW Mode” to enter into the sub-menu;
You can adjust the vaping effect among Soft/Normal/Hard/Max.
Wattage value adjustment
You can set your favorite wattage value by touching virtual up/down buttons, from 10W to 85W; (the wattage value will fast increase or decrease if you long press the virtual button for more than one second; if there’s no operation the virtual button will fade in two seconds)
2) TC MODE
Gently press the “TC Mode” to enter into the sub-menu;
You can choose coil materials among Ti/Ni200/SS
Wattage value adjustment
Gently press the “Preheat”, and then you can set your favorite wattage by pressing “+/-”;
Gently press the “TCR Setting” and you can adjust the value by touching +/- icon.
3) Puff DataGently press the “Puffs” and enter into sub-menu;
“Max Puff” means you can set limited puff numbers, you can adjust the value by pressing +/- icon to increase or decrease;
“Puff Already” means the puff number you have taken;
“Puff Clear” means puff counter clearing function
SettingGently press the “Screen” and enter into sub-menu:
Screen Color: There are 6 colors available for screen setting, you can choose your favorite by simple touch.
Screen Time: You can set Screen time by pressing +/- icon.
How to fill with e-liquid
1) Hold the atomizer in your left hand. Holding down the “Press” button with your right hand, twist the cap counterclockwise.
2) Add e-liquid through the slot while being careful not to drip into the central chimney.
3) Close the cap carefully and firmly. Let it stand for several minutes to get the organic cotton completely saturated.
Replace atomizer core:Firstly, unscrew the base, then unscrew the coil head from the base, hen secure your new coil head onto the base plate (ensure that it is screwed in securely), finally screw the new coil head into chimney and you’re ready to prime your new coil head.
Control air input:Rotate the bottom adjustable airflow system to control air input.
Attentions1. Before use please read the manual carefully
2. Connect the atomizer to a power source that is suitable for its intended use.
3. Please avoid making the e-liquid into your mouth directly
4. Please do not keep the liquid inside the atomizer if the device is not going to be used for a long period.
5. Please refill the tank when the e-liquid is nearly used out to avoid dry-burning of the atomizer.
6. Please do not drop, throw or mishandle this product as the outer shell or inner components may become damaged.
7. In order to prolong the operation of your product, please keep it away from excessive temperature and humid environment.
8. Please keep this product away from children and pregnant women.
Underage sale is prohibited. Depending on your country/region legal smoking age.18+ and over 21+ in other country/regions.
This product is not intended for use by person under legal smoking age, nonsmokers, women who are pregnant or breastfeeding, or person with or at risk of heart disease, high blood pressure, diabetes, or taking medicine or depression asthma.
Appendix1 Key Function Table