Vape Kits


Vape Tanks

Vape Mods


New Arrive

» » » » » » » » Vaporesso VECO SOLO PLUS All-in-One Starter Kit User Manual

Switch On/Off: Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will
be powered off after 5 presses.

Vaping: Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale.

Filling E-liquid: This easy top-fill tank will only ask of you to screw out the lid and fill in the chamber when the base is securely shut. Be sure to safely position the glass part when this process is in place to avoid spillage.

Changing Atomizer: Unscrew the tank from the base to remove and insert a new atomizer. Pull the EUC out from the base and insert a new one. Screw the Base on. Wait after replacing to make sure the coil is well primed.

Charging: Simply charge VECO SOLO PLUS Kit by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button
light will go out. The LED Indicator will be white if the battery is more than 70%,turn blue if the battery is more than 30% and turn red if the battery is less
than 30%.

Short Circuit Protection:
1.When the short circuit occurs before working, the button light flashes for 5 times and there will be no output power.

2.Low Wattage Protection
When the battery voltage is lower than 3V, the fire button light flashes for 3 times and the battery will be locked.

3.Over Vaping Protection
When the fire button is pressed for more than 10 seconds, the light flashes 3
times then goes off. The battery will be locked.

4.Low Battery Protection
When the battery is less than 10%, the light will flashes till it goes off completely.

Newer Post
Older Post

No comments:

Leave a Reply